Specifications of vibrators M3
Designed for industrial continuous duty, the M3 series features a compact shape, reduced overall dimensions, terminal box underneath which means also a high electric protection in dusty environments. Multi-holes mounting feet enable M3 series to match several existing mounting plates. M3 series motors comply with the most recent international standards for use in explosive dust atmospheres. Particularly M3 series can be used in zones 21 and 22.
Three-phase voltage from 24V to 690V, 50Hz o 60Hz or singlephase 100-130V, 60Hz and 200-240V, 50Hz; suitable for use with an inverter from 20Hz to the base frequency with constant torque load profile.
2 and 4 poles.
Conformity with European Directives
ATEX 94/9/EC. Low Voltage 2006/95/EC.
IEC/EN 61241-0, IEC/EN 61241-1, EN 60034-1.
Continual service (S1) at maximum declared centrifugal force and electric power. Intermittent services are also possible depending on the type of vibrator and the operating conditions. For detailed information contact our technical assistance office.
Range up to 311 kgf (3.05 kN). Centrifugal force can be changed by adjusting the eccenctric weights
IP 66 according to IEC 529, EN 60529.
Protection against mechanical impacts
IK 08 according to IEC 68, EN 50102.
Class F (155°C).
Standard with vacuum encapsulation.
From -20°C to +40°C. Versions for higher or lower temperatures are available on request.
Vibrator thermal protection
On request with PTC thermistor rated heat detectors 130°C (DIN 44081-44082).
Fixing of the vibrator
In all positions and therefore without restriction. The terminal box is positioned underneath the vibrator, on the same side as the fixing base.
Sealed ball bearings, lubricated “for life”.
The terminal box is positioned underneath the vibrator, on the same side as the fixing base. Special shaped terminals allow to fix the power supply cable, protecting it from loosening.
Three-phase or single-phase asynchronous type. Insulated windings using vacuum encapsulating. The rotor is die cast aluminium.
In high-tensile aluminium alloy, with sand blasted surface.
In ductile cast iron. The geometry of the flange transmits the load to the casing uniformly.
In treated steel alloy (Isothermic hardening) resistant to stress.
Easily adjustable from 100% down to 0.
Made in die cast, high strength alluminium alloy with accurate surface sand blasting.
II 2 D
Level of protection
tD A21 IP66
LCIE 05 ATEX 6163 X
Areas of use
Regulation CAN/CSA - C22.2 N. 100-95, file n° LR100948 Class 4211 01 - Motors and generators.
Mechanical protection IP66 (EN 60529), protection against impacts IK 08 (EN 50102)
II 2 D, tD A21 IP66 IEC/EN 61241-0, IEC/EN 61241-1 Certificate n. LCIE 05 ATEX 6163X
Certificate GOST-R n° POCC IT.??04.B01154, standards GOST R 51330.0-99, GOST R 51330.1-99, GOST R 51330.8-99, GOST R IEC 61241-1-1-99
Certificate of Conformity n° IECEx CES 09.0001X standards IEC 61241-0, IEC 61241-1.
Comply with the applicable European Union directives